Wednesday, October 28th, 2015

The continuous process of applying up to three separate coating layers onto one or both sides of a metal strip substrate takes place on a coil coating line. These lines vary greatly in size, with widths from 18 inches to over 60 inches and speeds from 100 feet per minute to 700 feet per minute; however, all coil-coating lines share the same basic process steps. A typical organic coil coating line consists of decoilers, entry strip accumulator, cleaning, chemical pretreatment,Read More …

Intended Uses Used to repair and fill up the floor surface before painting with antistatic finish in order to provide smooth conductive surface for next coat. Product Information It can be applied by doctor blade. Thick film may be obtained. After drying, no contraction or crack takes place to the film. Easy to be applied.The film possesses good adhesion, high strength, and small electric resistance. Its apperance is smooth. Application details Volume Solids:90% Color:Black Dry Flm Thickness: Depending on substrateRead More …

Traditional methods of corrosion protection for metals are: plating, powder paints and liquid paints.The performance of the coatings sprayed by all kinds of coatings,as well as different spraying methods vary, but in general, compared to liquid paint coatings, and plating coating, powder coatings give a dense structure with coating thickness (0.02-3.0mm), good shielding effect for various media, this is the reason of powder coated substrate gives longer life expectancy. Powder coatings,in the process,present with great variety,high efficiency,low cost,easy to operate,no pollution and other characteristics of performance, in products with anti-corrosion,decorating,electrical insulation,long life and other advantages.Therefore,powder coatings can ,in many ways,replace the traditional liquid paint for anti corrosion,show all the time its increasing charm inRead More …