Powder coating line

Powder coating system – Powder coat system Spraying both A powder booth is an enclosure that is designed to contain the powder application process. A recovery system is attached to the powder booth shell. The recovery system uses a fan to pull air into the booth and prevent the oversprayed powder from migrating out of the enclosure. Spraying gun The spray gun is designed to impart an electrostatic charge to the powder material and direct it toward a grounded workpiece.The electrostatic chargeRead More …

Powder coating line – Powder coat line – Powder spray both – Spraying gun – Curing oven Spraying both A powder booth is an enclosure that is designed to contain the powder application process. A recovery system is attached to the powder booth shell. The recovery system uses a fan to pull air into the booth and prevent the oversprayed powder from migrating out of the enclosure. Spraying gun The spray gun is designed to impart an electrostatic charge to theRead More …

The coating line is equipped with two moveable spray-booths. Allows easy and fast color changes. Curing is done in tunnel oven. Pre-treatment by dip immersion; chromating and/or phosphating process is usually employed. Typical coating line when coating long items, i.e. extrusions or larger sheets.

Automatic Powder coating line with one booth, typical equipment used on large series in one color. Pre-treatment is either iron or zinc phosphating. The curing takes place in a U-TURN oven. The coating line is equipped with the Jotun Powder Coatings “Big Bag” system.