Powder Coating News

The quality control of powder coatings is a key link to ensure the performance and appearance of the final product. Here are some steps and methods to ensure the quality control of powder coatings:   1. Raw material inspection: All raw materials are strictly inspected for quality to ensure that they meet the specified standards and specifications.   Check the purity, particle size distribution, color and chemical stability of resins, curing agents, pigments, fillers and additives, etc.   2. ProductionRead More …

In the realm of industrial finishing, powder coating stands out as a versatile and eco-friendly solution that offers a durable, high-quality finish. The success of your powder coating project hinges largely on the quality of the powder itself. Selecting the right supplier for your powder coating powder is a critical decision that can impact the performance, appearance, and longevity of your products. This blog post aims to provide you with a comprehensive guide to choosing the best powder coating powderRead More …

Flame retardant thermosetting powder coatings are mainly made by adding 1-10% of the total amount of flame retardant to conventional cyclopolymer powder coatings or polyester powder coatings, taking the flakes extruded from the extruder for direct combustion to determine the oxygen index, and evaluating it with reference to GB 2406-1993. And refer to GB 14907-2002 to determine the fire resistance. The conditions that flame retardants should have: High flame retardant efficiency, no or slightly lowering the original physical, mechanical andRead More …

Powder coating dispersants are a type of dispersant used to assist pigments and fillers in powder coatings. Its function is to evenly disperse solid particles into liquid media to ensure that the powder coating has good rheology, stability and uniformity. There are many types of powder coating dispersants. Several commonly used powder coating dispersants are introduced below. Organic solvents: Organic solvents are a common powder coating dispersant. It can interact with powder particles to help disperse the particles. The selectionRead More …

The color difference standard of powder coating can be divided into two common standards, namely △E and NCS standards. △E is an international color difference standard, which indicates the color difference between different samples. The lower the color difference value, the smaller the color difference between samples and the more similar the colors. The NCS standard is a color standard system developed by the Swedish Color Association (The Natural Colour System). It divides colors into 6 basic colors and 15Read More …

Powder coating sagging refers to the uneven flow of powder on the surface of the coated part during the coating process, forming a sag or sagging phenomenon. Sagging may cause problems such as uneven coating thickness and poor surface quality. The following are some reasons that may cause powder coating sagging: 1. Properties of powder coating: -High viscosity: High viscosity of powder coating may lead to poor fluidity and increase the risk of sagging. -Excessive particles: Excessive particles may makeRead More …

The density of powder coating depends on its composition and formulation. Generally speaking, the density of powder coating ranges from 1.2 to 1.8 g/cm3. The specific density may also be affected by factors such as particle size, shape and porosity. Further subdivided, the following are the density ranges of several common powder coatings:   Pure polymer powder coating: Its density is usually between 1.2 and 1.5 g/cm3. This type of powder coating is mainly composed of pure polymers, such asRead More …

The effects of conventional additives are similar, and the formulas are basically the same. For example, the amount of leveling agent absorbed by epoxy resin is 4% to 5%, and the amount of leveling agent absorbed by silica, called through-flow, is 0.8% to 1.6%. For the dosage of resin and curing agent, first determine the content of the base material in the formula, and then calculate it according to the recommended ratio. Generally, the excess curing agent is 5-10%. SoRead More …

Powder additives are an important component of powder coatings and are necessary substances to improve the performance of powder coatings in certain aspects such as production, construction or coating film. Although the additive amount is much less than that of resin, curing agent and pigments and fillers, and the total amount is generally within 5%, its impact on the performance of powder coatings is extremely important.   An excellent powder coating additive must meet the following conditions: small addition amountRead More …

The storage temperature is below 24℃, in a low temperature and dry environment. Keep away from fire sources, avoid direct sunlight, and maintain good ventilation. Do not expose the conductive powder coating to the air at will after use. The bag should be covered or tightly closed at any time to prevent debris from being mixed in. All equipment used for painting must be properly grounded to eliminate static electricity. Avoid unwarranted discharge from the coating machine. In the powderRead More …